Log message:
ham/hamlib: Update to 4.6.5
Upstream NEWS: bugfixes

Log message:
ham/hamlib: Update to 4.6.4
Upstream news, less bug fixes:
Version 4.6.4
        * 2025-07-18--Hamlib's 25th birthday!!!
        * Add CW sending capability to Flex SmartSDR.  (TNX Michael Morgan)

Log message:
ham/hamlib: Update to 4.6.3
Upstream news, less most bug fixes:
Version 4.6.3
        * 2025-06-10
        * Release dedicated to the memory of Michael Black, W9MDB (SK).  Mike was a
          long-time contributor to Hamlib and led development of the project for over
          five years from 2020 to 2025.  Mike passed away on March 28, 2025 due to
          complications from ALS (Lou Gehrig's disease).
        * Restore IC-7300 spectrum data callback - regression in 4.6 (n3gb)
        * IC-705 filter selection bandwidth for FM and WFM (TNX Kenji Rikitake)
        * IC-705 COMP, VD, and ID meter calibration values (TNX Kenji Rikitake)
        * Add rig CODAN 2110

Log message:
ham/hamlib: Update to 4.6.2
Upstream NEWS:
Version 4.6.2
        * Add missing levels for IC746/PRO \ 
RIG_LEVEL_RFPOWER_METER,RIG_LEVEL_RFPOWER_METER_WATTS,RIG_LEVEL_SWR,RIG_LEVEL_AL \ 
C
        * Fix IC905 for gpredict
        * Fix potential segfault on QMX
        * Fix pmr171

Log message:
ham/hamlib: Update to 4.6.1
packaging: Drop bugfix patch adopted by upstream.
Upstream NEWS:
Version 4.6.1
        * Fix C++ builds failing on rig_list_foreach function
        * Fix IC9100 rigctld startup to end up on VFOA
        * Fix grig build by removing sys/socket.h -- apparently not needed
        * Add new QMX entry to fix incompability with QDX
        * Fix IC746/PROT to not use data byte
        * FLRig to add DATA-U DATA-L modes
        * Fix TS570 RIG_LEVEL_STRENGTH with cal table
        * Remove get_powerstat from IC785X -- not supported
        * Fix SDRConsole by removing lots of things it does not have

Log message:
ham/hamlib: Update to 4.6
Upstream NEWS, less bugfixes, addition of radios, and minor improvements.
Version 4.6 (2024-12-24)
	* send_raw can now take hex digits as colon-separated -- e.g. send_raw icom \ 
xfe:xfe:x94:xe0:03:xfd
        * Added macros for applications to obtain pointers to Hamlib \ 
structures(issues #1445, #1420, #487).
          Internal conversion is still a WIP, but use of these macros will make \ 
the final cutover transparent to applications.
        * Unify behavior of all rigctl split commands
          * Make the set_split_* commands modify the state of the specified \ 
split VFO -- the current or targeted VFO do not have any effect
          * Make the set_split_* commands enable split automatically if not enabled
          * Make the get_split_* commands return frequency of 0 Hz, mode NONE \ 
and filter of 0 Hz if split is not enabled
          * Allow all split commands to avoid VFO swapping if supported by the \ 
rig model
        * Expose "Targetable features" (RIG_TARGETABLE_*) in dump_caps \ 
output to allow clients to determine which commands can be executed without VFO \ 
swapping
        * Added VOICE/CW memory capability to many rigs -- thanks to David \ 
Balharrie M0DGB/G8FKH
        * Add -# --skip_init option to rigctl to skip rig initialization -- \ 
useful for executing commands quickly
        * rig_caps is no longer constant -- this may break some 3rd party \ 
relying on the "const" declaration.  Here's an example of how to \ 
handle compatibility.
	    #ifdef RIGCAPS_NOT_CONST
	    static int add_to_list(struct rig_caps* rc, void*)
	    #else
	    static int add_to_list(const struct rig_caps* rc, void*)
	    #endif
        * Hamlib now starts a multicast server that sends out rig information.  \ 
Does not receive commands yet.
          See README.multicast
        * rigctld has new -b/bind-all option to try all interfaces -- restores \ 
original behavior.  This was done to fix duplicate rigctld instances on Windows
        * Yaesu rigs can now use send_morse to send keyer message 1-5 or a CW \ 
message up to 50 chars (which will use memory 1)
        * rig set level METER can now take SWR,COMP,ALC,IC/ID,DB,PO,VDD,TEMP \ 
arguments to set which meter to display
        * Added parm BANDSELECT for Yaesu rigs
            'p BANDSELECT' returns current band of VFOA
            'P BANDSELECT BAND160M' example selects the 160M band
            'P BANDSELECT ?' shows  bands available for the rig
        * Added rig_cm108_get/set_bit to API and get/set_gpio to rigctl(d) for \ 
GPIO1,2,3,4 access on CM108
        * Add client_version to rigctld so client can report it's version for \ 
future use/compatibility/alternatives
        * Add --set-conf=tuner_control_pathname=hamlib_tuner_control (default)
          If file exists then it will be called with 0/1 (Off/On) argument
          with 'U TUNER 0' or 'U TUNER 1"
          Default path is for current directory

Log message:
*: recursive bump for Python 3.11 as new default

Log message:
ham/hamlib: Update to 4.5.5
Upstream changes since 4.5.4: bugfixes and minor improvements