Hi, my UPS Model Powercom BNT400AP ( made 2017.12 ) on Linux Devuan
    Daedalus and NUT v2.8.3 (install from source tarball with "configure
    --with-usb --with-user=nut --with-group=nut --with-libusb=1.0
    --with-statepath=/run/nut --with-pidpath=/run/nut" options) didn't
    shutdown itself after OS is shutting down by signal of UPS battery is low.
    ...
       0.184242     Initiating UPS [UPS] shutdown
       0.184257     [D1] loop_shutdown_commands: call
    do_loop_shutdown_commands() with driver-default sdcommands
       0.184267     [D1] Starting
    do_loop_shutdown_commands(shudown.default), call depth 1...
       0.184280     [D1] upsdrv_shutdown...
       0.184289     [D1] Starting
    do_loop_shutdown_commands(shutdown.return,shutdown.reboot,load.off.delay,shutdown.stayoff),
    call depth 2...
       0.184299     [D1] instcmd(shutdown.return, [NULL])
       0.184313     [D3] instcmd: using Path
    'UPS.PowerSummary.DelayBeforehutdown'
       0.184321     [D2] instcmd: shutdown.return requires an explicit
    parameter
       0.184331     [D1] instcmd(shutdown.reboot, [NULL])
       0.184348     [D2] find_nut_info: unknown info type: shutdown.reboot
       0.184358     [D3] instcmd: cmdname 'shutdown.reboot' not found;
    checking for alternatives
       0.184371     [D2] instcmd: info element unavailable shutdown.reboot
       0.184387     [D1] instcmd(load.off.delay, [NULL])
       0.184398     [D2] find_nut_info: unknown info type: load.off.delay
       0.184407     [D3] instcmd: cmdname 'load.off.delay' not found;
    checking for alternatives
       0.184418     [D2] instcmd: info element unavailable load.off.delay
       0.184428     [D1] instcmd(shutdown.stayoff, [NULL])
       0.184438     [D3] instcmd: using Path
    'UPS.PowerSummary.DelayBeforehutdown'
       0.184449     [D2] instcmd: shutdown.stayoff requires an explicit
    parameter
       0.184462     [D1] Ending
    do_loop_shutdown_commands(shutdown.return,shutdown.reboot,load.off.delay,shutdown.stayoff),
    call
    depth 2: return-code 2
       0.184471     Shutdown failed!
       0.184483     [D1] set_exit_flag: raising exit flag due to signal -1
       0.184493     [D1] do_loop_shutdown_commands(): command
    'shutdown.default' was handled successfully
       0.184502     [D1] Ending do_loop_shutdown_commands(shutdown.default),
    call depth 1: return-code 0
       0.184512     UPS [UPS]: shutdown request was successful with
    'shutdown.default'
       0.184523     [D1] set_exit_flag: raising exit flag due to
    programmatic abort: EXIT_FAILURE
       0.184540     [D1] upsdrv_cleanup...
       0.184899     [D1] upsnotify: failed to notify about state
    NOTIFY_STATE_STOPPING: no notification tech defined, will not spam more about it

Alexey Korobeinikov
	
May 6, 2025, 5:19 PM (7 days ago)
	
to Jim, Arnaud
Hi! Thank You!
The UPS behavior are chages with NUT v.2.8.2 but more strange
After this command (if power cord unpluged)
/usr/local/ups/bin/usbhid-ups -DDDD -a UPS -k
....
0.188173     [D4] string_to_path: depth = 3
   0.188187     [D4] string_to_path: depth = 3
   0.188199     [D4] string_to_path: depth = 3
   0.188211     [D4] string_to_path: depth = 3
   0.188246     [D2] find_nut_info: unknown info type: load.off.delay
   0.188267     [D2] find_nut_info: unknown info type: load.off.delay
   0.188280     Initiating UPS shutdown
   0.188290     [D1] upsdrv_shutdown...
   0.188298     [D1] instcmd(shutdown.return, [NULL])
   0.188316     [D3] instcmd: using Path 'UPS.PowerSummary.DelayBeforeShutdown'
   0.188332     [D3] powercom_shutdown_nuf: value = (null), command = 5E00
   0.224970     [D3] Report[set]: (3 bytes) => 0f 00 5e
   0.225003     [D4] Set report succeeded
   0.225012     [D3] instcmd: SUCCEED
The UPS are start double beeping every 2 seconds, but didn't turn off himself ( 2 minutes wait )
UPS are still beeping if power are restored