This is a 34-36-key-board.

• 36 keys, two of them can be replaced by rotary encoders making it support 34-36 keys and 2-4 encoders.
• bright RGB Underglow with WS2812b LEDs
• one SSD1306 OLED per side
• support for the pimoroni trackball
• powered by QMK-firmware (Firmware has been merged and can be found on the QMK master)
• aggressive pinky stagger similar to the Kyria but with a slightly alternative thumb cluster to raise comfort for large hands
• support for MX and Kailh choc v1 switches
• files for fr4 plate and acrylic bottom plate as well as OLED window

• PCBs are fully working (OLED, LEDs, all switches, encoders, Trackball)
• acrylic plates have arrived and fit perfectly
• 3D-printable case has been added thanks to the awesome work of Sadek Baroudi
• basic ZMK Firmware (not all features implemented yet) exists on my fork of the zmk firmware

• hardware availability is always a big problem and ordering everything yourself is a big hustle. Therefore I'm happy to tell you that Ben from keycapsss (not me) is so kind to offer everything to make a full build. And for those of you who are American, littlekeyboards (also not me) also offers kits
• if you live in a remote area resulting in high shipping costs or problems with importing, gerbers for ordering the PCBs and SVGs for getting plates cut are available in this repo, too

• for the upper encoder you can't use the really big guitar knobs as they're too wide and will interfere with the OLEDs, the smaller ones are recommended
• the thumb cluster is lower than on boards like the Corne keyboard
• liking or disliking a layout is not a matter of how "good" the layout is but mostly preference, hence I recommend looking at a split keyboard comparison site and print out some layouts to confirm you like it. (DracuLad can be found there, too)
• before purchasing encoders, make sure they fit! The holes in the plate are 12mm x 12mm and won't fit bigger encoders. They're in particular not the size of the switch footprints.