HTTP/2 200
date: Sat, 11 Oct 2025 01:54:56 GMT
content-type: application/rfc+xml; charset=utf-8
content-length: 13270
cf-ray: 98cabb78faa59ac4-BLR
last-modified: Wed, 22 Feb 2023 19:13:42 GMT
etag: "103f9-5f54eb1c27b5d-gzip"
accept-ranges: bytes
vary: Accept-Encoding
content-encoding: gzip
strict-transport-security: max-age=31536000; includeSubDomains
x-frame-options: SAMEORIGIN
x-xss-protection: 1; mode=block
x-content-type-options: nosniff
cf-cache-status: DYNAMIC
set-cookie: __cf_bm=UeZUze5PO2I3jIO9hx9KGUnFNrv1SOq.jzgSe5bVAUw-1760147696-1.0.1.1-i1tuGW6ksmbpmiplA0w95pQSR8_fxa02qBHif96sxBLFutdegVh.YarSgtZJHANcSY56ZvIK6sWcS047Sb6DYfyNdK2.r130v0F5R.J1WhU; path=/; expires=Sat, 11-Oct-25 02:24:56 GMT; domain=.rfc-editor.org; HttpOnly; Secure; SameSite=None
server: cloudflare
alt-svc: h3=":443"; ma=86400
]>
IS-IS Extensions to
Support Segment Routing over the IPv6 Data Plane
Cisco Systems
Pribinova Street 10
Bratislava
81109
Slovakia
ppsenak@cisco.com
Cisco Systems
Brussels
- Type:
- 25. Single octet, as defined in Section 9 of .
- Length:
- Single octet, as defined in Section 9 of . The
length value is 2 + length of sub-sub-TLVs.
- Flags:
- 2 octets. The following flags are defined:
- where:
-
- O-flag:
- If set, the router supports use of the O-bit
in the SRH, as defined in .
The remaining bits, including bit 0, are reserved for future use. They MUST
be set to zero on transmission and MUST be ignored on receipt.
Advertising Supported Algorithms
An SRv6-capable router indicates one or more supported algorithms by advertising the
Segment Routing Algorithm sub-TLV, as defined in .
Advertising Maximum SRv6 SID Depths
defines the means
to advertise node-/link-specific values for MSDs of
various types.
Node MSDs are advertised in a sub-TLV of the Router
Capability TLV . Link MSDs are advertised in a
sub-TLV of TLVs 22, 23, 25, 141, 222, and 223.
This document defines the relevant SRv6 MSDs and requests MSD type
assignments in the "IGP MSD-Types" registry created by .
Maximum Segments Left MSD Type
The Maximum Segments Left MSD Type signals the maximum value of
the "Segments Left" field
in the SRH of a received packet before applying the Endpoint behavior
associated with a SID.
SRH Max Segments Left Type: 41
If no value is advertised, the supported value is 0.
Maximum End Pop MSD Type
The Maximum End Pop MSD Type signals the maximum number of SIDs
in the SRH to which the router can apply "Penultimate Segment Pop (PSP) of the SRH" or
"Ultimate Segment Pop (USP) of the SRH" behavior, as defined in "Flavors" ().
SRH Max End Pop Type: 42
If the advertised value is zero or no value is advertised,
then the router cannot apply PSP or USP flavors.
Maximum H.Encaps MSD Type
The Maximum H.Encaps MSD Type signals the maximum number of SIDs that
can be added to the segment list of an SRH as part of the "H.Encaps"
behavior, as defined in .
SRH Max H.encaps Type: 44
If the advertised value is zero or no value is advertised, then the
headend can apply an SR Policy that only contains one segment without
inserting any SRH header.
A non-zero SRH Max H.encaps MSD indicates that the headend can insert
an SRH up to the advertised number of SIDs.
Maximum End D MSD Type
The Maximum End D MSD Type specifies the maximum number of SIDs present
in an SRH when performing decapsulation. As specified in ,
the permitted SID types include, but are not limited to, End.DX6, End.DT4,
End.DT46, End with USD, and End.X with USD.
SRH Max End D Type: 45
If the advertised value is zero or no value is advertised,
then the router cannot apply any behavior that results in
decapsulation and forwarding of the inner packet if the
outer IPv6 header contains an SRH.
SRv6 SIDs and Reachability
As discussed in , an SRv6 Segment
Identifier (SID) is 128 bits and consists of locator, function, and argument parts.
A node is provisioned with topology-/algorithm-specific locators for
each of the topology/algorithm pairs supported by that node. Each
locator is a covering prefix for all SIDs provisioned on that node that
have the matching topology/algorithm.
Locators MUST be advertised in the SRv6 Locator TLV (see ).
Forwarding entries for the locators advertised in the SRv6 Locator
TLV MUST be installed in the forwarding plane of receiving SRv6-capable
routers when the associated topology/algorithm is supported by the
receiving node. The processing of the prefix advertised in the SRv6 Locator TLV,
the calculation of its reachability, and the installation in the forwarding plane
follows the process defined for the Prefix Reachability TLV 236
or TLV 237 .
Locators associated with algorithms 0 and 1 (for all supported topologies)
SHOULD also be advertised in a Prefix Reachability TLV (236 or 237) so that
legacy routers (i.e., routers that do not support SRv6) will install a
forwarding entry for algorithms 0 and 1 SRv6 traffic.
In cases where the same prefix with the same prefix length, Multi-Topology Identifier
(MTID), and algorithm is received in both a Prefix Reachability TLV and an SRv6
Locator TLV, the Prefix Reachability advertisement MUST be preferred when installing
entries in the forwarding plane. This is to prevent inconsistent forwarding entries
between SRv6-capable and SRv6-incapable routers. Such preference of Prefix Reachability
advertisement does not have any impact on the rest of the data advertised in the
SRv6 Locator TLV.
Locators associated with Flexible Algorithms (see ) SHOULD NOT be advertised
in Prefix Reachability TLVs (236 or 237). Advertising the Flexible
Algorithm locator in a regular Prefix Reachability TLV (236 or 237) would make
the forwarding for it follow the algorithm 0 path.
SRv6 SIDs are advertised as sub-TLVs in the SRv6 Locator TLV, except
for SRv6 SIDs that are associated with a specific
neighbor/link and are therefore advertised as sub-TLVs in TLVs 22, 23,
25, 141, 222, and 223.
SRv6 SIDs received from other nodes are not directly routable and MUST NOT
be installed in the forwarding plane. Reachability to SRv6 SIDs depends upon the existence
of a covering locator.
Adherence to the rules defined in this section will ensure that SRv6
SIDs associated with a supported topology/algorithm pair will be
forwarded correctly, while SRv6 SIDs associated with an unsupported
topology/algorithm pair will be dropped. NOTE: The drop behavior depends
on the absence of a default/summary route covering a given locator.
In order for forwarding to work correctly, the locator associated
with SRv6 SID advertisements must be the longest match prefix installed
in the forwarding plane for those SIDs. In order to ensure correct forwarding,
network operators should take steps to make sure that this requirement is not
compromised. For example, the following situations should be avoided:
- Another locator associated with a different topology/algorithm is
the longest match.
- Another prefix advertisement (i.e., from TLV 236 or 237) is the longest
match.
Advertising Anycast Property
Both prefixes and SRv6 Locators may be configured as anycast; as such, the
same value can be advertised by multiple routers. It is useful for other routers
to know that the advertisement is for an anycast identifier.
A new flag in the Prefix Attribute Flags sub-TLV is
defined to advertise the anycast property:
- Bit #:
- 4
- Name:
- Anycast Flag (A-flag)
When the prefix/SRv6 Locator is configured as anycast, the A-flag
SHOULD be set. Otherwise, this flag MUST be clear.
The A-flag MUST be preserved when the advertisement is leaked between levels.
The A-flag and the N-flag MUST NOT both be set. If both the N-flag and the A-flag are
set in the prefix/SRv6 Locator advertisement, the receiving routers MUST ignore
the N-flag.
The same prefix/SRv6 Locator can be advertised by multiple routers. If at least
one of them sets the A-flag in its advertisement, the prefix/SRv6 Locator SHOULD be
considered as anycast.
A prefix/SRv6 Locator that is advertised by a single node and without
an A-flag MUST be considered node specific.
All the nodes advertising the same anycast locator MUST instantiate the
exact same set of SIDs under that anycast locator. Failure to do so may result in
traffic being dropped or misrouted.
The Prefix Attribute Flags sub-TLV can be carried in the SRv6
Locator TLV as well as the Prefix Reachability TLVs. When a router originates
both the Prefix Reachability TLV and the SRv6 Locator TLV for a given
prefix, it SHOULD advertise the Prefix Attribute Flags sub-TLV, if used, in both TLVs and use the same flags. However, unlike TLVs 236
and 237 ,
the X-flag in the Prefix Attributes Flags sub-TLV is valid when sent in the SRv6
Locator TLV. When included in the Locator TLV, the state of the X-flag in the Prefix Attributes
Flags sub-TLV MUST match the setting of the embedded "X-bit" in any
advertisement for the same prefix in TLVs 236 and 237
. In case of any inconsistency between the Prefix Attribute
Flags advertised in the Locator TLV and in the Prefix Reachability TLV, the ones
advertised in the Prefix Reachability TLV MUST be preferred.
Advertising Locators and End SIDs
The SRv6 Locator TLV is introduced to advertise SRv6 Locators and End
SIDs associated with each locator.
This new TLV shares the sub-TLV space defined for TLVs 135, 235, 236,
and 237.
SRv6 Locator TLV Format
The SRv6 Locator TLV has the following format:
- Type:
- 27. Single octet, as defined in Section 9 of .
- Length:
- Single octet, as defined in Section 9 of .
The length value is variable.
- R Bits:
- Reserved for future use. They MUST be
set to zero on transmission and MUST be ignored on receipt.
- MTID:
- Multi-Topology Identifier, as defined in .
Note that the value 0 is legal.
The SRv6 Locator TLV is followed by one or more locator entries of the form:
- Metric:
- 4 octets, as described in .
- Flags:
- 1 octet. The following flags are defined:
- D-flag: "up/down bit" as described in
.
- The remaining bits are reserved for future use. They MUST be
set to zero on transmission and MUST be ignored on receipt.
- Algorithm:
- 1 octet, as defined in the "IGP Algorithm Types" registry .
- Loc-Size:
- 1 octet. Number of bits in the SRv6 Locator field, which
MUST be from the range (1-128). The entire TLV MUST be ignored
if the Loc-Size is outside this range.
- Locator:
- 1-16 octets. This field encodes the advertised SRv6
Locator. The SRv6 Locator is encoded in the minimal number of
octets for the given number of bits. Trailing bits MUST be set
to zero and ignored when received.
- Sub-TLV-length:
- 1 octet. Number of octets used by sub-TLVs.
- Optional Sub-TLVs:
- Supported sub-TLVs are specified in .
Any sub-TLV that is not allowed in the SRv6 Locator TLV MUST be
ignored.
The Prefix Attribute Flags sub-TLV
SHOULD be included in the Locator TLV.
The Prefix Attribute Flags sub-TLV MUST be included in the Locator
TLV when it is leaked upwards in the hierarchy or originated as a result of the
redistribution from another protocol or another IS-IS instance. If the Prefix Attribute
Flags sub-TLV is not included in these cases, receivers will be unable to determine the
correct source of the advertisement. The receivers will be unable to detect the
violation.
SRv6 End SID Sub-TLV
The SRv6 End SID sub-TLV is introduced to advertise SRv6 SIDs with Endpoint behaviors that do not require a
particular neighbor in order to be correctly applied.
SRv6 SIDs associated with a neighbor are advertised using the sub-TLVs defined
in .
Supported behavior values, together with parent TLVs in which they are
advertised, are specified in of this document. Please note
that not all behaviors defined in
are defined in this document, e.g., End.T is not.
This new sub-TLV is advertised in the SRv6 Locator TLV defined in
the previous section. SRv6 End SIDs inherit the topology/algorithm
from the parent locator.
The SRv6 End SID sub-TLV has the following format:
- Type:
- 5. Single octet, as defined in Section 9 of .
- Length:
- Single octet, as defined in Section 9 of .
The length value is variable.
- Flags:
- 1 octet. No flags are currently defined. All bits are reserved for future
use. They MUST be set to zero on transmission and MUST be
ignored on receipt.
- Endpoint Behavior:
- 2 octets, as defined in .
Supported behavior values for this sub-TLV are defined in of this document. Unsupported or unrecognized behavior values are
ignored by the receiver.
- SID:
- 16 octets. This field encodes the advertised SRv6 SID.
- Sub-sub-TLV-length:
- 1 octet. Number of octets used by sub-sub-TLVs.
- Optional Sub-sub-TLVs:
- Supported sub-sub-TLVs are specified in
. Any sub-sub-TLV that is not allowed in the
SRv6 End SID sub-TLV MUST be ignored.
The SRv6 End SID MUST be allocated from its associated locator.
SRv6 End SIDs that are not allocated from the associated
locator MUST be ignored.
Multiple SRv6 End SIDs MAY be associated with the same locator. In
cases where the number of SRv6 End SID sub-TLVs exceeds the capacity
of a single TLV, multiple Locator TLVs for the same locator MAY be
advertised. For a given MTID/Locator, the algorithm MUST be the same in
all TLVs. If this restriction is not met, all TLVs for that
MTID/Locator MUST be ignored.
Advertising SRv6 Adjacency SIDs
Certain SRv6 Endpoint behaviors are
associated with a particular adjacency.
This document defines two new sub-TLVs of TLVs 22, 23, 25, 141, 222, and 223
-- namely "SRv6 End.X SID sub-TLVs" and "SRv6 LAN End.X SID sub-TLVs".
IS-IS neighbor advertisements are topology specific but not
algorithm specific. SIDs advertised in SRv6 End.X SID and SRv6 LAN End.X SID sub-TLVs
therefore inherit the topology from the associated neighbor advertisement, but
the algorithm is specified in the individual SID.
All SIDs advertised in SRv6 End.X SID and SRv6 LAN End.X SID sub-TLVs MUST
be a subnet of a Locator with matching topology and algorithm that are advertised
by the same node in an SRv6 Locator TLV. SIDs that do not meet this
requirement MUST be ignored. This ensures that the node advertising
these SIDs is also advertising its corresponding Locator with the algorithm
that will be used for computing paths destined to the SID.
SRv6 End.X SID Sub-TLV
This sub-TLV is used to advertise an SRv6 SID associated with a
point-to-point adjacency. Multiple SRv6 End.X SID sub-TLVs MAY be
associated with the same adjacency.
The SRv6 End.X SID sub-TLV has the following format:
- Type: 43.
- Single octet, as defined in Section 9 of .
- Length:
- Single octet, as defined in Section 9 of .
The length value is variable.
- Flags:
- 1 octet.
- where:
-
- B-Flag:
- Backup flag. If set, the SID is eligible
for protection, e.g., using IP Fast Reroute (IPFRR) , as described in .
- S-Flag:
- Set flag. When set, the S-flag indicates that the
SID refers to a set of adjacencies (and therefore
MAY be assigned to other adjacencies as well).
- P-Flag:
- Persistent flag. When set, the P-flag indicates that
the SID is persistently allocated, i.e., the
SID value remains consistent across router restart
and/or interface flap.
- Reserved bits:
- Reserved bits MUST be zero when originated and
MUST be ignored when received.
- Algorithm:
- 1 octet, as defined in the "IGP Algorithm Types" registry .
- Weight:
- 1 octet. The value represents the weight of the
SID for the purpose of load balancing. The use
of the weight is defined in [RFC8402].
- Endpoint Behavior:
- 2 octets, as defined in .
Supported behavior values for this sub-TLV are defined in
of this document. Unsupported or unrecognized behavior values are ignored
by the receiver.
- SID:
- 16 octets. This field encodes the advertised SRv6 SID.
- Sub-sub-TLV-length:
- 1 octet. Number of octets used by sub-sub- TLVs.
- Optional Sub-sub-TLVs:
- Supported sub-sub-TLVs are specified in
. Any sub-sub-TLV that is not allowed in
SRv6 End.X SID sub-TLV MUST be ignored.
Note that multiple TLVs for the same neighbor may be
required in order to advertise all the SRv6 SIDs associated
with that neighbor.
SRv6 LAN End.X SID Sub-TLV
This sub-TLV is used to advertise an SRv6 SID associated with a LAN
adjacency. Since the parent TLV is advertising an adjacency to the
Designated Intermediate System (DIS) for the LAN, it is necessary to
include the System-ID of the physical neighbor on the LAN with which
the SRv6 SID is associated. Given that many neighbors may
exist on a given LAN, multiple SRv6 LAN END.X SID sub-TLVs may
be associated with the same LAN. Note that multiple TLVs for the same
DIS neighbor may be required in order to advertise all the SRv6
SIDs associated with that neighbor.
The SRv6 LAN End.X SID sub-TLV has the following format:
- Type:
- 44. Single octet, as defined in Section 9 of .
- Length:
- Single octet, as defined in Section 9 of .
The length value is variable.
- Neighbor System-ID:
- IS-IS System-ID of length "ID Length", as defined in .
- Flags:
- 1 octet.
The B-, S-, and P-flags are as described in . Reserved bits MUST be zero when originated and
MUST be ignored when received.
- Algorithm:
- 1 octet, as defined in the "IGP Algorithm Types" registry .
- Weight:
- 1 octet. The value represents the weight of the
SID for the purpose of load balancing. The use
of the weight is defined in [RFC8402].
- Endpoint Behavior:
- 2 octets, as defined in .
Supported behavior values for this sub-TLV are defined in of this document. Unsupported or unrecognized behavior values are
ignored by the receiver.
- SID:
- 16 octets. This field encodes the advertised SRv6 SID.
- Sub-sub-TLV-length:
- 1 octet. Number of octets used by sub-sub- TLVs.
- Optional Sub-sub-TLVs:
- Supported sub-sub-TLVs are specified in
. Any sub-sub-TLV that is not allowed in
SRv6 LAN End.X SID sub-TLV MUST be ignored.
Note that multiple TLVs for the same neighbor, on the same LAN, may be
required in order to advertise all the SRv6 SIDs associated
with that neighbor.
SRv6 SID Structure Sub-Sub-TLV
The SRv6 SID Structure sub-sub-TLV is an optional sub-sub-TLV of:
- SRv6 End SID sub-TLV ()
- SRv6 End.X SID sub-TLV ()
- SRv6 LAN End.X SID sub-TLV ()
The SRv6 SID Structure sub-sub-TLV is used to advertise the structure of the SRv6 SID,
as defined in . It has the following format:
- where:
-
- Type:
- 1. Single octet, as defined in Section 9 of .
- Length:
- Single octet, as defined in Section 9 of .
The length value is 4 octets.
- LB Length:
- 1 octet. SRv6 SID Locator Block length in bits.
- LN Length:
- 1 octet. SRv6 SID Locator Node length in bits.
- Fun. Length:
- 1 octet. SRv6 SID Function length in bits.
- Arg. Length:
- 1 octet. SRv6 SID Arguments length in bits.
The IS-IS SRv6 SID Structure sub-sub-TLV MUST NOT appear more than once in its parent
sub-TLV. If it appears more than once in its parent sub-TLV, the parent sub-TLV MUST be
ignored by the receiver.
The sum of all four sizes advertised in the IS-IS SRv6 SID Structure sub-sub-TLV MUST
be less than or equal to 128 bits. If the sum of all four sizes advertised in the IS-IS SRv6
SID Structure sub-sub-TLV is larger than 128 bits, the parent sub-TLV MUST be ignored
by the receiver.
The SRv6 SID Structure sub-sub-TLV is intended for informational use by the control and
management planes. It MUST NOT be used at a transit node (as defined in
) for forwarding packets. As an example, this information
could be used for the following:
- validation of SRv6 SIDs being instantiated in the network and
advertised via IS-IS. These can be learned by controllers via Border Gateway Protocol - Link
State (BGP-LS) and then be
monitored for conformance to the SRv6 SID allocation scheme chosen by the operator,
as described in .
- verification and automation for securing the SRv6 domain by
provisioning filtering rules at SR domain boundaries, as described
in .
The details of these potential applications are outside the scope of
this document.
Advertising Endpoint Behaviors
Endpoint behaviors are defined in
. The codepoints for the
Endpoint behaviors are defined in the "SRv6 Endpoint Behaviors" registry defined in
. If a behavior is advertised, it
MUST only be advertised in the
TLV(s) marked with "Y" in the table below and MUST NOT be advertised in the
TLV(s) marked with "N" in the table below.
Endpoint Behaviors
| Endpoint Behavior |
Endpoint Behavior Codepoint |
End SID |
End.X SID |
Lan End.X SID |
| End (PSP, USP, USD) |
1-4, 28-31 |
Y |
N |
N |
| End.X (PSP, USP, USD) |
5-8, 32-35 |
N |
Y |
Y |
| End.DX6 |
16 |
N |
Y |
Y |
| End.DX4 |
17 |
N |
Y |
Y |
| End.DT6 |
18 |
Y |
N |
N |
| End.DT4 |
19 |
Y |
N |
N |
| End.DT46 |
20 |
Y |
N |
N |
IANA Considerations
This document requests allocation for the following TLVs, sub-TLVs,
and sub-sub-TLVs by updating the existing registries and defining
new registries under the "IS-IS TLV Codepoints" grouping.
SRv6 Locator TLV
The SRv6 Locator TLV shares sub-TLV space with TLVs advertising prefix
reachability. IANA has updated the "IS-IS Sub-TLVs for TLVs Advertising
Prefix Reachability" registry initially defined in by adding this document as a reference and updating the description of that registry to include the SRv6 Locator TLV (27).
This document makes the following registration in the "IS-IS Top-Level TLV Codepoints"
registry:
IS-IS Top-Level TLV Codepoints Registry
| Value |
Name |
IIH |
LSP |
SNP |
Purge |
| 27 |
SRv6 Locator |
n |
y |
n |
n |
SRv6 End SID Sub-TLV
This document makes the following registration:
IS-IS Sub-TLVs for TLVs Advertising Prefix Reachability Registry
| Type |
Description |
27 |
135 |
235 |
236 |
237 |
Reference |
| 5 |
SRv6 End SID |
y |
n |
n |
n |
n |
RFC 9352, |
IS-IS Sub-TLVs for TLVs Advertising Prefix Reachability Registry
IANA has updated the "IS-IS Sub-TLVs for TLVs Advertising Prefix Reachability" registry to include a column for the SRv6 Locator TLV (27) as shown below:
IS-IS Sub-TLVs for TLVs Advertising Prefix Reachability Registry
| Type |
Description |
27 |
135 |
235 |
236 |
237 |
| 1 |
32-bit Administrative Tag Sub-TLV |
y |
y |
y |
y |
y |
| 2 |
64-bit Administrative Tag Sub-TLV |
y |
y |
y |
y |
y |
| 3 |
Prefix Segment Identifier |
n |
y |
y |
y |
y |
| 4 |
Prefix Attribute Flags |
y |
y |
y |
y |
y |
| 6 |
Flexible Algorithm Prefix Metric (FAPM) |
n |
y |
y |
y |
y |
| 11 |
IPv4 Source Router ID |
y |
y |
y |
y |
y |
| 12 |
IPv6 Source Router ID |
y |
y |
y |
y |
y |
| 32 |
BIER Info |
n |
y |
y |
y |
y |
SRv6 Capabilities Sub-TLV
This document makes the following registration in the "IS-IS Sub-TLVs for IS-IS
Router CAPABILITY TLV" registry:
IS-IS Sub-TLVs for IS-IS Router CAPABILITY TLV Registry
| Value |
Description |
Reference |
| 25 |
SRv6 Capabilities |
RFC 9352, |
IS-IS Sub-Sub-TLVs for the SRv6 Capabilities Sub-TLV Registry
IANA has created the "IS-IS Sub-Sub-TLVs for SRv6 Capabilities Sub-TLV" registry under the
"IS-IS TLV Codepoints" grouping for the assignment of sub-TLV
types for the SRv6 Capabilities sub-TLV specified in this document (). This registry defines sub-sub-TLVs for the SRv6
Capabilities sub-TLV (25) advertised in the IS-IS Router
CAPABILITY TLV (242).
The registration procedure is "Expert Review", as defined in . Guidance for the designated
experts is provided in .
No sub-sub-TLVs are defined by this document, except for
the reserved type 0.
IS-IS Sub-Sub-TLVs for SRv6 Capabilities Sub-TLV Registry
| Value |
Description |
Reference |
| 0 |
Reserved |
RFC 9532 |
| 1-255 |
Unassigned |
|
SRv6 End.X SID and SRv6 LAN End.X SID Sub-TLVs
This document makes the following registrations in the
"IS-IS Sub-TLVs for TLVs Advertising Neighbor Information" registry:
IS-IS Sub-TLVs for TLVs Advertising Neighbor Information Registry
| Type |
Description |
22 |
23 |
25 |
141 |
222 |
223 |
Reference |
| 43 |
SRv6 End.X SID |
y |
y |
y |
y |
y |
y |
RFC 9352, |
| 44 |
SRv6 LAN End.X SID |
y |
y |
y |
y |
y |
y |
RFC 9352, |
MSD Types
This document makes the following registrations in the "IGP MSD-Types"
registry:
IGP MSD-Types
| Value |
Name |
Reference |
| 41 |
SRH Max SL |
RFC 9352 |
| 42 |
SRH Max End Pop |
RFC 9352 |
| 44 |
SRH Max H.encaps |
RFC 9352 |
| 45 |
SRH Max End D |
RFC 9352 |
IS-IS Sub-Sub-TLVs for SRv6 SID Sub-TLVs Registry
IANA has created the "IS-IS Sub-Sub-TLVs for SRv6 SID Sub-TLVs" registry under the
"IS-IS TLV Codepoints" grouping to assign sub-TLV
types for the SID sub-TLVs specified in this document (Sections
, , and ).
This registry defines sub-sub-TLVs for SRv6 SID sub-TLVs. This includes the following sub-TLVs:
- SRv6 End SID (5) (Advertised in SRv6 Locator TLV (27))
- SRv6 End.X SID (43) (Advertised in TLVs advertising neighbor
information)
- SRv6 LAN End.X SID (44) (Advertised in TLVs advertising
neighbor information)
The registration procedure is "Expert Review", as defined in . Guidance for the designated experts is provided in . The following
assignments are made by this document:
IS-IS Sub-Sub-TLVs for SRv6 SID Sub-TLVs Registry
| Type |
Description |
5 |
43 |
44 |
Reference |
| 0 |
Reserved |
|
|
|
RFC 9352 |
| 1 |
SRv6 SID Structure |
y |
y |
y |
RFC 9352 |
| 2-255 |
Unassigned |
|
|
|
|
Prefix Attribute Flags Sub-TLV
This document adds a new bit in the "IS-IS Bit Values for Prefix Attribute Flags
Sub-TLV" registry:
IS-IS Bit Values for Prefix Attribute Flags Sub-TLV Registry
| Bit # |
Name |
Reference |
| 4 |
Anycast Flag (A-flag) |
RFC 9352, |
IS-IS SRv6 Capabilities Sub-TLV Flags Registry
IANA has created the "IS-IS SRv6 Capabilities Sub-TLV Flags" registry under the "IS-IS TLV
Codepoints" grouping to assign bits 0 to 15 in the Flags field of the
IS-IS SRv6 Capabilities sub-TLV specified in this document (). This registry defines bit values advertised in the
Flags field of the SRv6 Capabilities sub-TLV (25). This sub-TLV
is advertised in the IS-IS Router CAPABILITY TLV (242).
The registration procedure is "Expert Review", as defined in
. Guidance for the designated
experts is provided in .
The following assignments are made by this document:
IS-IS SRv6 Capabilities Sub-TLV Flags Registry
| Type |
Description |
Reference |
| 0 |
Unassigned |
|
| 1 |
O-flag |
RFC 9352, |
| 2-15 |
Unassigned |
|
IS-IS SRv6 Locator TLV Flags Registry
IANA has created the "IS-IS SRv6 Locator TLV Flags" registry under the "IS-IS TLV
Codepoints" grouping to assign bits 0 to 7 in the Flags field of the
SRv6 Locator TLV specified in this document (). This registry defines bit values advertised in the
Flags field of the SRv6 Locator TLV (27).
The registration procedure is "Expert Review", as defined in
. Guidance for the designated
experts is provided in . The following
assignments are made by this document:
IS-IS SRv6 Locator TLV Flags Registry
| Value |
Description |
Reference |
| 0 |
D-flag |
RFC 9352, |
| 1-7 |
Unassigned |
|
IS-IS SRv6 End SID Sub-TLV Flags Registry
IANA has created the "IS-IS SRv6 End SID Sub-TLV Flags" registry under the "IS-IS TLV
Codepoints" grouping to assign bits 0 to 7 in the Flags field of the
IS-IS SRv6 End SID sub-TLV specified in this document (). This registry defines bit values advertised in the
Flags field of the SRv6 End SID sub-TLV (5), which is advertised in
the SRv6 Locator TLV (27).
The registration procedure is "Expert Review", as defined in
. Guidance for the designated
experts is provided in .
No assignments are made by this document.
IS-IS SRv6 End SID Sub-TLV Flags Registry
| Value |
Description |
| 0-7 |
Unassigned |
IS-IS SRv6 Adjacency SID Sub-TLVs Flags Registry
IANA has created the "IS-IS SRv6 Adjacency SID Sub-TLVs Flags" registry under the "IS-IS TLV
Codepoints" grouping to assign bits 0 to 7 in the Flags field of the
IS-IS SRv6 End.X SID and LAN End.X SID sub-TLVs (Sections and ).
This registry defines bit values advertised in the
Flags field of SRv6 SID sub-TLVs associated with adjacencies.
These sub-TLVs are advertised in TLVs advertising neighbor
information. The list of sub-TLVs includes:
- SRv6 End.X SID (43)
- SRv6 LAN End.X SID (44)
The registration procedure is "Expert Review", as defined in . Guidance for the designated experts is provided in . The
following assignments are made by this document:
IS-IS SRv6 Adjacency SID Sub-TLVs Flags Registry
| Value |
Description |
Reference |
| 0 |
B-flag |
RFC 9352, |
| 1 |
S-flag |
RFC 9352, |
| 2 |
P-flag |
RFC 9352, |
| 3-7 |
Unassigned |
|
Security Considerations
Security concerns for IS-IS are addressed in ,
, and . While IS-IS is deployed
under a single administrative domain, there can be deployments where potential
attackers have access to one or more networks in the IS-IS routing domain.
In these deployments, the stronger authentication mechanisms defined in the
aforementioned documents SHOULD be used.
This document describes the IS-IS extensions required to support SR over an IPv6 data plane. The security considerations for SR are discussed in .
defines the SRv6 Network Programming concept and specifies the main
SR behaviors to enable the creation of interoperable overlays;
the security considerations from that document apply too.
The advertisement for an incorrect MSD value may have negative
consequences; see for additional considerations.
Security concerns associated with the setting of the O-flag are described in
.
Security concerns associated with the usage of Flexible Algorithms are described in
).
References
Normative References
IGP Flexible Algorithm
Information technology - Telecommunications and information exchange between systems - Intermediate System to Intermediate System intra-domain routeing information exchange protocol for use in conjunction with the protocol for providing the connectionless-mode network service (ISO 8473)
International Organization for
Standardization
Second Edition
Informative References
Acknowledgements
Thanks to for his review comments and shepherd
work.
Thanks to and for
AD review and comments.
Contributors
The following people gave a substantial contribution to the content
of this document and should be considered coauthors:
Huawei Technologies
stefano@previdi.net
Cisco Systems
Saint Paul
Minnesota
United States of America
pauwells@cisco.com
daniel.voyer@bell.ca
satoru.matsushima@g.softbank.co.jp
bart.peirens@proximus.com
hani.elmalky@ericsson.com
prem@barefootnetworks.com
msharif@barefootnetworks.com
Cisco Systems
Millenium Plaza Building, V Celnici 10, Prague 1
Prague
Czech Republic
rhanzl@cisco.com
Cisco Systems, Inc.
ketant@cisco.com
