Creating and Extending Models

Oxidized supports a growing list of operating system types. Out of the box, most model implementations collect configuration data. Some implementations also include a conservative set of additional commands that collect basic device information (device make and model, software version, licensing information, ...) which are appended to the configuration as comments.

A user may wish to extend an existing model to collect the output of additional commands. Oxidized offers smart loading of models in order to facilitate this with ease, without the need to introduce changes to the upstream source code.

This methodology allows local site changes to be preserved during Oxidized version updates / gem updates. It also enables convenient local development of new models.

Index

Creating a new model
Extending an existing model with a new command
Create unit tests for the model
Advanced features
Monkey-patching blocks in existing models
Help

Creating a new model

An Oxidized model, at minimum, requires just three elements:

A model file, this file should be placed in the ~/.config/oxidized/model directory and named after the target OS type.
A class defined within this file with the same name as the file itself that inherits from Oxidized::Model, the base model class.
At least one command that will be executed and the output of which will be collected by Oxidized.

A bare-bone example for a fictional model running the OS type rootware could be introduced by creating the file ~/.config/oxidized/model/rootware.rb, with the following content:

class RootWare < Oxidized::Model
  using Refinements
  
  cmd 'show complete-config'

  cfg :ssh do
    pre_logout 'exit'
  end
end

This model, as-is will:

Log into the device with ssh and expect the default prompt.
Upon matching it, execute the command show complete-config
Collect the output.
Logout with the command exit

It is often useful to, at minimum, define the following additional elements for any newly introduced module:

A regexp for the prompt, via the prompt statement.
A comment prefix, via the comment statement.
A regexp for telnet username and password prompts.
A mechanism for handling enable or similar functionality.

The API documentation contains a list of methods that can be used in modules.

A more fleshed out example can be found in the IOS and JunOS models.

Common task: mechanism for handling 'enable' mode

The following code snippet demonstrates how to handle sending the 'enable' command and an enable password.

This example is taken from the IOS model. It covers scenarios where users need to enable privileged mode, either without providing a password (by setting enable: true in the configuration) or with a password.

  cfg :telnet, :ssh do
    post_login do
      if vars(:enable) == true
        cmd "enable"
      elsif vars(:enable)
        cmd "enable", /^[pP]assword:/
        cmd vars(:enable)
      end
    end
  end

Note: remove :telnet, if your device does not support telnet.

Common Task: remove ANSI escape codes

⚠️ This common task is experimental. If it does not work for you, please open an issue so that we can adapt the code snippet.

Some devices produce ANSI escape codes to enhance the appearance of output. However, this can make prompt matching difficult and some of these ANSI escape codes might end up in the resulting configuration.

You can remove most ANSI escape codes using the following Ruby code in your model:

  # Remove ANSI escape codes
  expect /\e\[[0-?]*[ -\/]*[@-~]\r?/ do |data, re|
    data.gsub re, ''
  end

Explanation of the Regular Expression:

\e\[ : Control Sequence Introducer (CSI), which starts with "ESC [".
[0-?]* : "Parameter" bytes (range 0x30–0x3F, corresponding to ASCII 0–9:;<=>?).
[ -\/]*: "Intermediate" bytes (range 0x20–0x2F, corresponding to ASCII !"#$%&'()*+,-./).
[@-~] : The "final" byte (range 0x40–0x7E, corresponding to ASCII @A–Z[\]^_`a–z{|}~).[).
\r? : Some ESC codes include a carriage return, which we do not want in the resulting config.

Extending an existing model with a new command

The example below can be used to extend the JunOS model to collect the output of show interfaces diagnostics optics and append the output to the configuration file as a comment. This command retrieves DOM information on pluggable optics present in a JunOS-powered chassis.

Create the file ~/.config/oxidized/model/junos.rb with the following contents:

require 'oxidized/model/junos.rb'


class JunOS
  using Refinements

  cmd 'show interfaces diagnostics optics' do |cfg|
    comment cfg
  end


end

Due to smart loading, the user-supplied ~/.config/oxidized/model/junos.rb file will take precedence over the model with the same name included in the Oxidized distribution.

The code then uses require to initially load the Oxidized-supplied model, and extends the class defined therein with an additional command.

Intuitively, it is also possible to:

Completely re-define an existing model by creating a file in ~/.config/oxidized/model/ with the same name as an existing model, but not require-ing the upstream model file.
Create a named variation of an existing model, by creating a file with a new name (such as ~/.config/oxidized/model/junos-extra.rb), Then require the original model and extend its base class as in the above example. The named variation can then be specified as an OS type for specific devices that can benefit from the extra functionality. This allows for preservation of the base functionality for the default model types.
Create a completely new model, with a new name, for a new operating system type.
Testing/validation of an updated model from the Oxidized GitHub repo models by placing an updated model in the proper location without disrupting the gem-supplied model files.

Create Unit Tests for the Model

If you want the model to be integrated into Oxidized, you can submit a pull request on GitHub. This is a greatly appreciated submission, as there are probably other users using the same network device as you are.

A good (and optional) practice for submissions is to provide a unit test for your model. This reduces the risk that further developments could break it, and facilitates debugging issues without having access to a physical network device for the model.

Advanced features

The loosely-coupled architecture of Oxidized allows for easy extensibility in more advanced use cases as well.

The example below extends the functionality of the JunOS model further to collect display set formatted configuration from the device, and utilizes the multi-output functionality of the git output to place the returned configuration in a separate file within a git repository.

It is possible to configure the git output to create new subdirectories under an existing repository instead of creating new repositories for each new defined output type (the default) by including the following configuration in the ~/.config/oxidized/config file:

output:
    git:
        type_as_directory: true

Then, ~/.config/oxidized/model/junos.rb is adapted as following:

require 'oxidized/model/junos.rb'


class JunOS
  using Refinements

  cmd 'show interface diagnostic optics' do |cfg|
    comment cfg
  end

  cmd 'show configuration | display set' do |cfg|
    cfg.type = "junos-set"
    cfg.name = "set"
    cfg
  end
end

The output of the show configuration | display set command is marked with a new arbitrary alternative output type, junos-set. The git output will use the output type to create a new subdirectory by the same name. In this subdirectory, the git output will create files with the name <devicename>--set that will contain the output of this command for each device.

Monkey-patching blocks in existing models

In addition to adding new commands and blocks to existing models, Oxidized offers convenience methods for monkey-patching existing commands and blocks within existing models.

When defining a monkey-patched block, two boolean arguments can be passed as part of the block definition:

clear: true, which resets the existing block, allowing the user to completely override its contents.
prepend: true, which ensures that the contents of the block are prepended, rather than appended (the default) to an existing block.

This functionality is supported for cfg, cmd, pre, post, and expect blocks.

Examples:

cmd :secret, clear: true do
  # ... "(new code for secret removal which replaces the existing :secret definition in the model)" ...
end

cmd 'show version', clear: true do |cfg|
  # ... "(new code for parsing 'show version', replaces the existing definition in the model)" ...
end

cmd :ssh, prepend: true do
  # ... "(code that should run first, before any code in the existing :ssh definition in the model)" ...
end

Help

If you experience difficulties creating a new model, you can often get help by installing an Internet reachable sanitized device and opening a new issue on Github asking for help with creating the model. You should research what is the device vendor name is, the vendor's OS type name is, the exact device model name and firmware version. This information should be included in the issue.

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

Uh oh!