tags: worker, docker

07-1.部署 docker 组件

docker 是容器的运行环境，管理它的生命周期。kubelet 通过 Container Runtime Interface (CRI) 与 docker 进行交互。

安装依赖包

下载和分发 docker 二进制文件

到 https://download.docker.com/linux/static/stable/x86_64/ 页面下载最新发布包：

cd /opt/k8s/work
wget https://download.docker.com/linux/static/stable/x86_64/docker-18.06.1-ce.tgz
tar -xvf docker-18.06.1-ce.tgz

分发二进制文件到所有 worker 节点：

cd /opt/k8s/work
source /opt/k8s/bin/environment.sh
for node_ip in ${NODE_IPS[@]}
  do
    echo ">>> ${node_ip}"
    scp docker/docker*  root@${node_ip}:/opt/k8s/bin/
    ssh root@${node_ip} "chmod +x /opt/k8s/bin/*"
  done

创建和分发 systemd unit 文件

cd /opt/k8s/work
cat > docker.service <<"EOF"
[Unit]
Description=Docker Application Container Engine
Documentation=https://docs.docker.io

[Service]
WorkingDirectory=##DOCKER_DIR##
Environment="PATH=/opt/k8s/bin:/bin:/sbin:/usr/bin:/usr/sbin"
EnvironmentFile=-/run/flannel/docker
ExecStart=/opt/k8s/bin/dockerd $DOCKER_NETWORK_OPTIONS 
ExecReload=/bin/kill -s HUP $MAINPID
Restart=always
RestartSec=5
StartLimitInterval=0
LimitNOFILE=infinity
LimitNPROC=infinity
LimitCORE=infinity
Delegate=yes
KillMode=process

[Install]
WantedBy=multi-user.target
EOF

EOF 前后有双引号，这样 bash 不会替换文档中的变量，如 $DOCKER_NETWORK_OPTIONS；
dockerd 运行时会调用其它 docker 命令，如 docker-proxy，所以需要将 docker 命令所在的目录加到 PATH 环境变量中；
flanneld 启动时将网络配置写入 /run/flannel/docker 文件中，dockerd 启动前读取该文件中的环境变量 DOCKER_NETWORK_OPTIONS ，然后设置 docker0 网桥网段；
如果指定了多个 EnvironmentFile 选项，则必须将 /run/flannel/docker 放在最后(确保 docker0 使用 flanneld 生成的 bip 参数)；
docker 需要以 root 用于运行；
docker 从 1.13 版本开始，可能将 iptables FORWARD chain的默认策略设置为DROP，从而导致 ping 其它 Node 上的 Pod IP 失败，遇到这种情况时，需要手动设置策略为 ACCEPT：
```
$ sudo iptables -P FORWARD ACCEPT
```
并且把以下命令写入 /etc/rc.local 文件中，防止节点重启iptables FORWARD chain的默认策略又还原为DROP
```
/sbin/iptables -P FORWARD ACCEPT
```

完整 unit 见 docker.service

分发 systemd unit 文件到所有 worker 机器:

cd /opt/k8s/work
source /opt/k8s/bin/environment.sh
sed -i -e "s/##DOCKER_DIR##/${DOCKER_DIR}/" docker.service
for node_ip in ${NODE_IPS[@]}
  do
    echo ">>> ${node_ip}"
    scp docker.service root@${node_ip}:/etc/systemd/system/
  done

配置 docker daemon 参数

cd /opt/k8s/work
source /opt/k8s/bin/environment.sh
cat > docker-daemon.json <<EOF
{
    "registry-mirrors": ["https://docker.mirrors.ustc.edu.cn", "https://hub-mirror.c.163.com"],
    "insecure-registries": ["docker02:35000"],
    "max-concurrent-uploads": 10,
    "max-concurrent-downloads": 20,
    "live-restore": true,
    "debug": true,
    "data-root": "${DOCKER_DIR}/data",
    "exec-root": "${DOCKER_DIR}/exec",
    "log-opts": {
      "max-size": "100m",
      "max-file": "5"
    }
}
EOF

分发 daemon.json 文件到所有 worker 机器:

cd /opt/k8s/work
source /opt/k8s/bin/environment.sh
for node_ip in ${NODE_IPS[@]}
  do
    echo ">>> ${node_ip}"
    ssh root@${node_ip} "mkdir -p ${DOCKER_DIR}/{data,exec} /etc/docker"
    scp docker-daemon.json root@${node_ip}:/etc/docker/daemon.json
  done

启动 docker 服务

source /opt/k8s/bin/environment.sh
for node_ip in ${NODE_IPS[@]}
  do
    echo ">>> ${node_ip}"
    ssh root@${node_ip} "systemctl stop firewalld && systemctl disable firewalld"
    ssh root@${node_ip} "iptables -F && iptables -X && iptables -F -t nat && iptables -X -t nat"
    ssh root@${node_ip} "iptables -P FORWARD ACCEPT"
    ssh root@${node_ip} "systemctl daemon-reload && systemctl enable docker && systemctl restart docker"
    #ssh root@${node_ip} 'for intf in /sys/devices/virtual/net/docker0/brif/*; do echo 1 > $intf/hairpin_mode; done'
  done

关闭 firewalld(centos7)/ufw(ubuntu16.04)，否则可能会重复创建 iptables 规则；
清理旧的 iptables rules 和 chains 规则；
开启 docker0 网桥下虚拟网卡的 hairpin 模式;

检查服务运行状态

source /opt/k8s/bin/environment.sh
for node_ip in ${NODE_IPS[@]}
  do
    echo ">>> ${node_ip}"
    ssh root@${node_ip} "systemctl status docker|grep Active"
  done

确保状态为 active (running)，否则查看日志，确认原因：

journalctl -u docker

检查 docker0 网桥

source /opt/k8s/bin/environment.sh
for node_ip in ${NODE_IPS[@]}
  do
    echo ">>> ${node_ip}"
    ssh root@${node_ip} "/usr/sbin/ip addr show"
  done

确认各 work 节点的 docker0 网桥和 flannel.1 接口的 IP 处于同一个网段中(如 172.30.37.0/32 和 172.30.37.1/24)：

>>> 172.27.136.3
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1
    link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
    inet 127.0.0.1/8 scope host lo
       valid_lft forever preferred_lft forever
2: enp3s0f0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP group default qlen 1000
    link/ether 0c:c4:7a:2a:f6:50 brd ff:ff:ff:ff:ff:ff
    inet 172.27.136.3/20 brd 172.27.143.255 scope global noprefixroute enp3s0f0
       valid_lft forever preferred_lft forever
3: enp3s0f1: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc mq state DOWN group default qlen 1000
    link/ether 0c:c4:7a:2a:f6:51 brd ff:ff:ff:ff:ff:ff
4: flannel.1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1450 qdisc noqueue state UNKNOWN group default
    link/ether 7e:c4:ed:1a:53:58 brd ff:ff:ff:ff:ff:ff
    inet 172.30.37.0/32 scope global flannel.1
       valid_lft forever preferred_lft forever
5: docker0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc noqueue state DOWN group default
    link/ether 02:42:ec:a7:2b:41 brd ff:ff:ff:ff:ff:ff
    inet 172.30.37.1/24 brd 172.30.37.255 scope global docker0
       valid_lft forever preferred_lft forever

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

Uh oh!