Configuration

Installation

The tailwind-merge package is hosted on npm under the name tailwind-merge. There are lots of package managers for installing packages hosted on npm. Here are installation instructions for the most popular ones: npm, yarn, pnpm and bun.

npm add tailwind-merge
yarn add tailwind-merge
pnpm add tailwind-merge
bun add tailwind-merge

Basic usage

If you're using Tailwind CSS without any extra config, you can use twMerge right away. You can safely stop reading the documentation here.

Usage with custom Tailwind config

If you're using a custom Tailwind config, you may need to configure tailwind-merge as well to merge classes properly.

The default twMerge function is configured in a way that you can still use it if all the following points apply to your Tailwind config:

Only using color names which don't clash with other Tailwind class names
Only deviating by number values from number-based Tailwind classes
Only using font-family classes which don't clash with default font-weight classes
Sticking to default Tailwind config for everything else

If some of these points don't apply to you, you can test whether twMerge still works as intended with your custom classes. Otherwise, you need create your own custom merge function by either extending the default tailwind-merge config or using a completely custom one.

The tailwind-merge config is different from the Tailwind config because it's expected to be shipped and run in the browser as opposed to the Tailwind config which is meant to run at build-time. Be careful in case you're using your Tailwind config directly to configure tailwind-merge in your client-side code because that could result in an unnecessarily large bundle size.

Shape of tailwind-merge config

The tailwind-merge config is an object with a few keys.

const tailwindMergeConfig = {
    // ↓ Set how many values should be stored in cache.
    cacheSize: 500,
    // ↓ Optional prefix from Tailwind config
    prefix: 'tw-',
    // ↓ Optional separator from Tailwind config
    separator: '_',
    theme: {
        // Theme scales are defined here
        // This is not the theme object from your Tailwind config
    },
    classGroups: {
        // Class groups are defined here
    },
    conflictingClassGroups: {
        // Conflicts between class groups are defined here
    },
    conflictingClassGroupModifiers: {
        // Conflicts between postfix modifier of a class group and another class group are defined here
    },
}

Class groups

The library uses a concept of class groups which is an array of Tailwind classes which all modify the same CSS property. E.g. here is the position class group.

const positionClassGroup = ['static', 'fixed', 'absolute', 'relative', 'sticky']

tailwind-merge resolves conflicts between classes in a class group and only keeps the last one passed to the merge function call.

twMerge('static sticky relative') // → 'relative'

Tailwind classes often share the beginning of the class name, so elements in a class group can also be an object with values of the same shape as a class group (yes, the shape is recursive). In the object each key is joined with all the elements in the corresponding array with a dash (-) in between.

E.g. here is the overflow class group which results in the classes overflow-auto, overflow-hidden, overflow-visible and overflow-scroll.

const overflowClassGroup = [{ overflow: ['auto', 'hidden', 'visible', 'scroll'] }]

Sometimes it isn't possible to enumerate all elements in a class group. Think of a Tailwind class which allows arbitrary values. In this scenario you can use a validator function which takes a class part and returns a boolean indicating whether a class is part of a class group.

E.g. here is the fill class group.

const isArbitraryValue = (classPart: string) => /^\[.+\]$/.test(classPart)
const fillClassGroup = [{ fill: ['current', isArbitraryValue] }]

Because the function is under the fill key, it will only get called for classes which start with fill-. Also, the function only gets passed the part of the class name which comes after fill-, this way you can use the same function in multiple class groups. tailwind-merge exports its own validators, so you don't need to recreate them.

You can use an empty string ('') as a class part if you want to indicate that the preceding part was the end. This is useful for defining elements which are marked as DEFAULT in the Tailwind config.

// ↓ Resolves to filter and filter-none
const filterClassGroup = [{ filter: ['', 'none'] }]

Each class group is defined under its ID in the classGroups object in the config. This ID is only used internally, and the only thing that matters is that it is unique among all class groups.

Conflicting class groups

Sometimes there are conflicts across Tailwind classes which are more complex than "remove all those other classes when a class from this group is present in the class list string".

One example is the combination of the classes px-3 (setting padding-left and padding-right) and pr-4 (setting padding-right).

If they are passed to twMerge as pr-4 px-3, you most likely intend to apply padding-left and padding-right from the px-3 class and want pr-4 to be removed, indicating that both these classes should belong to a single class group.

But if they are passed to twMerge as px-3 pr-4, you want to set the padding-right from pr-4 but still want to apply the padding-left from px-3, so px-3 shouldn't be removed when inserting the classes in this order, indicating they shouldn't be in the same class group.

To summarize, px-3 should stand in conflict with pr-4, but pr-4 should not stand in conflict with px-3. To achieve this, we need to define asymmetric conflicts across class groups.

This is what the conflictingClassGroups object in the tailwind-merge config is for. You define a key in it which is the ID of a class group which creates a conflict and the value is an array of IDs of class group which receive a conflict.

const conflictingClassGroups = {
    px: ['pr', 'pl'],
}

If a class group creates a conflict, it means that if it appears in a class list string passed to twMerge, all preceding class groups in the string which receive the conflict will be removed.

When we think of our example, the px class group creates a conflict which is received by the class groups pr and pl. This way px-3 removes a preceding pr-4, but not the other way around.

Postfix modifiers conflicting with class groups

Tailwind CSS allows postfix modifiers for some classes. E.g. you can set font-size and line-height together with text-lg/7 with /7 being the postfix modifier. This means that any line-height classes preceding a font-size class with a modifier should be removed.

For this tailwind-merge has the conflictingClassGroupModifiers object in its config with the same shape as conflictingClassGroups explained in the section above. This time the key is the ID of a class group whose modifier creates a conflict and the value is an array of IDs of class groups which receive the conflict.

const conflictingClassGroupModifiers = {
    'font-size': ['leading'],
}

Theme

In the Tailwind config you can modify theme scales. tailwind-merge follows the same keys for the theme scales, but doesn't support all of them. tailwind-merge only supports theme scales which are used in multiple class groups to save bundle size (more info to that in PR 55). At the moment these are:

colors
spacing
blur
brightness
borderColor
borderRadius
borderSpacing
borderWidth
contrast
grayscale
hueRotate
invert
gap
gradientColorStops
gradientColorStopPositions
inset
margin
opacity
padding
saturate
scale
sepia
skew
space
translate

If you modified one of these theme scales in your Tailwind config, you can add all your keys right here and tailwind-merge will take care of the rest. If you modified other theme scales, you need to figure out the class group to modify in the default config.

Extending the tailwind-merge config

If you only need to slightly modify the default tailwind-merge config, extendTailwindMerge is the easiest way to extend the config. You provide it a configExtension object which gets merged with the default config. Therefore, all keys here are optional.

import { extendTailwindMerge } from 'tailwind-merge'

const customTwMerge = extendTailwindMerge<'foo' | 'bar' | 'baz'>({
    // ↓ Override elements from the default config
    //   It has the same shape as the `extend` object, so we're going to skip it here.
    override: {},
    // ↓ Extend values from the default config
    extend: {
        // ↓ Add values to existing theme scale or create a new one
        theme: {
            spacing: ['sm', 'md', 'lg'],
        },
        // ↓ Add values to existing class groups or define new ones
        classGroups: {
            foo: ['foo', 'foo-2', { 'bar-baz': ['', '1', '2'] }],
            bar: [{ qux: ['auto', (value) => Number(value) >= 1000] }],
            baz: ['baz-sm', 'baz-md', 'baz-lg'],
        },
        // ↓ Here you can define additional conflicts across class groups
        conflictingClassGroups: {
            foo: ['bar'],
        },
        // ↓ Define conflicts between postfix modifiers and class groups
        conflictingClassGroupModifiers: {
            baz: ['bar'],
        },
    },
})

Note

The function extendTailwindMerge computes a large data structure based on the config passed to it. I recommend to call it only once and store the result in a top-level variable instead of calling it inline within another repeatedly called function.

TypeScript types for `extendTailwindMerge`

If you're using TypeScript, you'll notice that all the places in the configExtension object where class group IDs and theme group IDs are used are typed strictly so that you're only allowed to use IDs which are defined in the default config of tailwind-merge. The strict TypeScript types are meant as a safety net to prevent you from making typos in your config and to give you auto-completion for IDs.

In case you want to define new class groups or theme objects, you need to add the IDs as a generic argument to extendTailwindMerge:

import { extendTailwindMerge } from 'tailwind-merge'

type AdditionalClassGroupIDs = 'class-a' | 'class-b'
type AdditionalThemeGroupIDs = 'theme-c' | 'theme-d'

const twMerge = extendTailwindMerge<
    // ↓ Add additional class group IDs as the first generic argument
    AdditionalClassGroupIDs,
    // ↓ Optionally, you can add additional theme group IDs as the second generic argument
    AdditionalThemeGroupIDs
>({
    extend: {
        theme: {
          // ↓ Works because we defined 'theme-c' as additional theme group ID
          'theme-c': […],
          // ↓ Works because we defined 'theme-d' as additional theme group ID
          'theme-d': […],
        },
        classGroups: {
            // ↓ Works because it's part of the default additional class group IDs
            shadow: […],
            // ↓ Works because we defined 'class-a' as additional class group ID
            'class-a': […],
            // ↓ Works because we defined 'class-b' as additional class group ID
            'class-b': […],
            // ↓ Type […] is not assignable to type […].
            //   Object literal may only specify known properties, and ''not-defined'' does not exist in type […]. ts(2322)
            'not-defined': [],
        },
    },
})

If those strict TypeScript types for IDs are too restrictive for you, you can also allow any strings as IDs by using the string type as generic argument.

import { extendTailwindMerge } from 'tailwind-merge'

const twMerge = extendTailwindMerge<string, string>(/* anything goes here */)

Using completely custom tailwind-merge config

If you need to modify the tailwind-merge config and need more control than extendTailwindMerge gives you or don't want to use the default config (and tree-shake it out of your bundle), you can use createTailwindMerge.

The function takes a callback which returns the config you want to use and returns a custom twMerge function.

import { createTailwindMerge } from 'tailwind-merge'

const customTwMerge = createTailwindMerge(() => ({
    cacheSize: 500,
    theme: {},
    classGroups: {
        foo: ['foo', 'foo-2', { 'bar-baz': ['', '1', '2'] }],
        bar: [{ qux: ['auto', (value) => Number(value) >= 1000] }],
        baz: ['baz-sm', 'baz-md', 'baz-lg'],
    },
    conflictingClassGroups: {
        foo: ['bar'],
    },
    conflictingClassGroupModifiers: {
        baz: ['bar'],
    },
}))

Note

The function createTailwindMerge computes a large data structure based on the config passed to it. I recommend to call it only once and store the result in a top-level variable instead of calling it inline within another repeatedly called function.

The callback passed to createTailwindMerge will be called when customTwMerge is called the first time, so you don't need to worry about the computations in it affecting app startup performance in case you aren't using tailwind-merge at app startup.

Using tailwind-merge plugins

You can use both extendTailwindMerge and createTailwindMerge with third-party plugins. Just add them as arguments after your config.

import { extendTailwindMerge, createTailwindMerge } from 'tailwind-merge'
import { withMagic } from 'tailwind-merge-magic-plugin'
import { withMoreMagic } from 'tailwind-merge-more-magic-plugin'

// With your own config
const twMerge1 = extendTailwindMerge({ … }, withMagic, withMoreMagic)

// Only using plugin with default config
const twMerge2 = extendTailwindMerge(withMagic, withMoreMagic)

// Using `createTailwindMerge`
const twMerge3 = createTailwindMerge(() => ({  … }), withMagic, withMoreMagic)

Next: Recipes

Previous: Limitations

Back to overview

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

Uh oh!

Uh oh!