How to Use

Preparation

Update WebUI to 1.8.0 and ControlNet to v1.1.441, then install this extension via link. I do not plan to support older version.
Download motion modules and put the model weights under stable-diffusion-webui/extensions/sd-webui-animatediff/model/. If you want to use another directory to save model weights, please go to Settings/AnimateDiff. See model zoo for a list of available motion modules.
Enable Pad prompt/negative prompt to be same length in Settings/Optimization and click Apply settings. You must do this to prevent generating two separate unrelated GIFs. Checking Batch cond/uncond is optional, which can improve speed but increase VRAM usage.

WebUI

Go to txt2img if you want to try txt2vid and img2img if you want to try img2vid.
Choose an SD checkpoint, write prompts, set configurations such as image width/height. If you want to generate multiple GIFs at once, please change batch number, instead of batch size.
Enable AnimateDiff extension, set up each parameter, then click Generate.
You should see the output GIF on the output gallery. You can access GIF output and image frames at stable-diffusion-webui/outputs/{txt2img or img2img}-images/AnimateDiff/{yy-mm-dd}. You may choose to save frames for each generation into the original txt2img / img2img output directory by uncheck a checkbox inside Settings/AnimateDiff.

API

It is quite similar to the way you use ControlNet. API will return a video in base64 format. In format, PNG means to save frames to your file system without returning all the frames. If you want your API to return all frames, please add Frame to format list. For most up-to-date parameters, please read here.

'alwayson_scripts': {
  'AnimateDiff': {
    'args': [{
      'model': 'mm_sd_v15_v2.ckpt',   # Motion module
      'format': ['GIF'],      # Save format, 'GIF' | 'MP4' | 'PNG' | 'WEBP' | 'WEBM' | 'TXT' | 'Frame'
      'enable': True,         # Enable AnimateDiff
      'video_length': 16,     # Number of frames
      'fps': 8,               # FPS
      'loop_number': 0,       # Display loop number
      'closed_loop': 'R+P',   # Closed loop, 'N' | 'R-P' | 'R+P' | 'A'
      'batch_size': 16,       # Context batch size
      'stride': 1,            # Stride 
      'overlap': -1,          # Overlap
      'interp': 'Off',        # Frame interpolation, 'Off' | 'FILM'
      'interp_x': 10          # Interp X
      'video_source': 'path/to/video.mp4',  # Video source
      'video_path': 'path/to/frames',       # Video path
      'mask_path': 'path/to/frame_masks',   # Mask path
      'latent_power': 1,      # Latent power
      'latent_scale': 32,     # Latent scale
      'last_frame': None,     # Optional last frame
      'latent_power_last': 1, # Optional latent power for last frame
      'latent_scale_last': 32,# Optional latent scale for last frame
      'request_id': ''        # Optional request id. If provided, outputs will have request id as filename suffix
      }
    ]
  }
},

If you wish to specify different conditional hints for different ControlNet units, the only additional thing you need to do is to specify batch_images parameter in your ControlNet JSON API parameters. The expected input format is exactly the same as how to use ControlNet in WebUI.

Parameters

Save format — Format of the output. Choose at least one of "GIF"|"MP4"|"WEBP"|"WEBM"|"PNG". Check "TXT" if you want infotext, which will live in the same directory as the output GIF. Infotext is also accessible via stable-diffusion-webui/params.txt and outputs in all formats.
1. You can optimize GIF with gifsicle (apt install gifsicle required, read #91 for more information) and/or palette (read #104 for more information). Go to Settings/AnimateDiff to enable them.
2. You can set quality and lossless for WEBP via Settings/AnimateDiff. Read #233 for more information.
3. If you are using API, by adding "PNG" to format, you can save all frames to your file system without returning all the frames. If you want your API to return all frames, please add Frame to format list.
Number of frames — Choose whatever number you like.

If you enter 0 (default):
- If you submit a video via Video source / enter a video path via Video path / enable ANY batch ControlNet, the number of frames will be the number of frames in the video (use shortest if more than one videos are submitted).
- Otherwise, the number of frames will be your Context batch size described below.
If you enter something smaller than your Context batch size other than 0: you will get the first Number of frames frames as your output GIF from your whole generation. All following frames will not appear in your generated GIF, but will be saved as PNGs as usual. Do not set Number of frames to be something smaler than Context batch size other than 0 because of #213.
FPS — Frames per second, which is how many frames (images) are shown every second. If 16 frames are generated at 8 frames per second, your GIF’s duration is 2 seconds. If you submit a source video, your FPS will be the same as the source video.
Display loop number — How many times the GIF is played. A value of 0 means the GIF never stops playing.
Context batch size — How many frames will be passed into the motion module at once. The SD1.5 motion modules are trained with 16 frames, so it’ll give the best results when the number of frames is set to 16. SDXL HotShotXL motion modules are trained with 8 frames instead. Choose [1, 24] for V1 / HotShotXL motion modules and [1, 32] for V2 / AnimateDiffXL motion modules.
Closed loop — Closed loop means that this extension will try to make the last frame the same as the first frame.
1. When Number of frames > Context batch size, including when ControlNet is enabled and the source video frame number > Context batch size and Number of frames is 0, closed loop will be performed by AnimateDiff infinite context generator.
2. When Number of frames <= Context batch size, AnimateDiff infinite context generator will not be effective. Only when you choose A will AnimateDiff append reversed list of frames to the original list of frames to form closed loop.
See below for explanation of each choice:
- N means absolutely no closed loop - this is the only available option if Number of frames is smaller than Context batch size other than 0.
- R-P means that the extension will try to reduce the number of closed loop context. The prompt travel will not be interpolated to be a closed loop.
- R+P means that the extension will try to reduce the number of closed loop context. The prompt travel will be interpolated to be a closed loop.
- A means that the extension will aggressively try to make the last frame the same as the first frame. The prompt travel will be interpolated to be a closed loop.
Stride — Max motion stride as a power of 2 (default: 1).
1. Due to the limitation of the infinite context generator, this parameter is effective only when Number of frames > Context batch size, including when ControlNet is enabled and the source video frame number > Context batch size and Number of frames is 0.
2. "Absolutely no closed loop" is only possible when Stride is 1.
3. For each 1 <= $2^i$ <= Stride, the infinite context generator will try to make frames $2^i$ apart temporal consistent. For example, if Stride is 4 and Number of frames is 8, it will make the following frames temporal consistent:
  - Stride == 1: [0, 1, 2, 3, 4, 5, 6, 7]
  - Stride == 2: [0, 2, 4, 6], [1, 3, 5, 7]
  - Stride == 4: [0, 4], [1, 5], [2, 6], [3, 7]
Overlap — Number of frames to overlap in context. If overlap is -1 (default): your overlap will be Context batch size // 4.
1. Due to the limitation of the infinite context generator, this parameter is effective only when Number of frames > Context batch size, including when ControlNet is enabled and the source video frame number > Context batch size and Number of frames is 0.
Frame Interpolation — Interpolate between frames with Deforum's FILM implementation. Requires Deforum extension. #128
Interp X — Replace each input frame with X interpolated output frames. #128.
Video source — [Optional] Video source file for ControlNet V2V. You MUST enable ControlNet. It will be the source control for ALL ControlNet units that you enable without submitting a single control image to Single Image tab or a path to Batch Folder tab in ControlNet panel. You can of course submit one control image via Single Image tab or an input directory via Batch Folder tab, which will override this video source input and work as usual.
Video path — [Optional] Folder for source frames for ControlNet V2V, but higher priority than Video source. You MUST enable ControlNet. It will be the source control for ALL ControlNet units that you enable without submitting a control image or a path to ControlNet. You can of course submit one control image via Single Image tab or an input directory via Batch Folder tab, which will override this video path input and work as usual.
FreeInit - [Optional] Using FreeInit to improve temporal consistency of your videos.
1. The default parameters provide satisfactory results for most use cases.
2. Use "Gaussian" filter when your motion is intense.
3. See original repo of Freeinit to for more parameter settings.

See ControlNet V2V for an example parameter fill-in and more explanation.

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

Uh oh!

Uh oh!